 |
|
|
|
|
|
|
Street 3rd Members
Street 3rd members are built using the following components. Good for non or mild performance street cars.
-Stock iron case & pinion support (good used),
-New HD 1330 series drive yoke,
-New 28 or 31 spline open diff, limited slip positraction differential, or locker,
-New ring & pinion (3:00 & up ratios),
-New bearings, pinion seal, ring gear bolts, solid pinion bearing spacer, and gasket.
-Fully assembled.
|
|
|
|
|
Street Plus 3rd Members
Street Plus 3rd members are built using the following components. Good for mild performance street / strip combo cars.
-New nodular iron case & billet aluminum pinion support,
-New HD 1330 series drive yoke,
-New 31 spline open diff, limited slip positraction differential, or locker,
-New ring & pinion (3:00 & up ratios),
-New bearings, pinion seal, ring gear bolts, solid pinion bearing spacer, and gasket.
-Fully assembled.
|
|
|
|
|
Pro Street 3rd Members
Pro Street 3rd members are built using the following components. Good for Hi-performance street / strip combo cars.
-New Strange nodular iron case & billet aluminum pinion support,
-New XHD Forged 1350 series drive yoke,
-New 31 or 35 spline limited slip positraction differential, or locker,
-New ring & pinion (3:00 & up ratios),
-New bearings, pinion seal, ring gear bolts, solid pinion bearing spacer, and gasket.
-Fully assembled.
Full Race 3rd members are built using the following components. Good for Hi-performance race cars only.
-New Strange nodular iron case & billet aluminum pinion support,
-New XHD Forged 1350 series drive yoke,
-New 35 spline full spool,
-New ring & pinion (3:00 & up ratios),
-New bearings, pinion seal, ring gear bolts, solid pinion bearing spacer, and gasket.
-Fully assembled.
Street Plus 3rd members are built using the following components. Good for mild performance street / strip combo cars.
-New nodular iron case & billet aluminum pinion support,
-New HD 1330 series drive yoke,
-New 31 spline open diff, limited slip positraction differential, or locker,
-New ring & pinion (3:00 & up ratios),
-New bearings, pinion seal, ring gear bolts, solid pinion bearing spacer, and gasket.
-Fully assembled.
|
|
|
|
|
3rd Member Cases & Pinion Supports:
Nodular Iron & Aluminum
|
|
|
|
Full Spools
|
|
|
|
Posi's & Lockers:
Clutch type Trac-Locs,
Gear type Tru-Tracs,
Ratchet type Lockers
|
|
|
|
Aluminum Support covers:
10 & 12 bolt GM, Dana 44 & 60, Ford 8.8, 14 bolt corp.
|
|
|
|
Forged pinion yokes:
Dana 60, 12 bolt GM, Ford 9", Mopar 8 3/4
|
|
|
|
